DEIONIZED WATER GENERATION SYSTEM UPVD-30-2

Product description
Capacity 30 litres
Electrical power no more than 0.03 kW
Voltage 220 V
Electrical conductivity of produced water, μS/cm no more than 1
Source water temperature, °C from 5 to 35
Automatic operation with purified water collector Yes
Possible transportation methods Air transport
The advantage of the UPD 30-2 water deioniser is its low power consumption. The UPD 30 type 2 laboratory reverse osmosis water purification system consumes only 30 W/h. Purification is achieved through the use of pre-filtration, reverse osmosis membranes and ionising resin. The UPD deioniser is suitable for enterprises, research centres and laboratories where type 2 laboratory analysis water with an electrical conductivity of no more than 1.0 μS/cm is required.

The units operate on tap water, unlike deionisers, which require distilled water as a starting point.
Negligible or no electricity consumption (depending on capacity).
Highly reliable design. Quick, convenient and inexpensive maintenance (replacement of filter elements).
The electrical diagram of the UPVD-30-2 unit provides for the possibility of joint operation of the unit with purified water collectors manufactured by PF Livam LLC, which can be connected to the unit's electrical block