DEIONIZED WATER GENERATION SYS UPVD-60-2 Livam LLC

Capacity: 60 litres per hour.
Electrical power: no more than 0.06 kW.
Voltage: 220 V.
Electrical conductivity of produced water, μS/cm: no more than 1.
Source water temperature, °C: from 5 to 35.
Automatic operation with purified water collector - Yes
Possible transportation methods - Air transport
The advantage of the UPD 60-2 water deioniser is its low power consumption. The UPD 60 type 2 laboratory reverse osmosis water treatment unit consumes only 60 W/h. Purification is achieved through the use of pre-filtration, reverse osmosis membranes and ionising resin. The UPD deioniser is suitable for enterprises, research centres and laboratories where type 2 laboratory analysis water with an electrical conductivity of no more than 1.0 μS/cm is required.
The units operate on tap water, unlike deionisers, which require distilled water as a source. Negligible or no electricity consumption (depending on capacity). Highly reliable design. Quick, convenient and inexpensive maintenance (replacement of filter elements). The electrical diagram of the UPVD-60-2 unit provides for the possibility of joint operation of the unit with purified water collectors manufactured by PF Livam LLC, which can be connected to the unit's electrical block.